ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA

3,000.00

RESEARCH INFORMATION

✎: ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA

❐: Chapter 1 – 5
♣:₦3, 000
❑: Ms Word format

: GET COMPLETE PROJECT MATERIAL

This study, “ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA” contains concise information that will serve as a framework or guide for your project work. The project study is well-researched for academic purposes and are usually provided in complete chapters with adequate References.

Keywords: ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA

 

RESEARCH BODY

Table of Contents

Title  –        –        –        –        –        –        –        –        –        –        –

Approval    –        –        –        –        –        –        –        –        –        –

Declaration-                   –        –        –        –        –        –        –        –        –

Acknowledgement         –        –        –        –        –        –        –        –        –

Abstract      –        –        –        –        –        –        –        –        –        –

CHAPTER ONE: Introduction

1.1     Background of the Study        –        –        –        –        –        –        –

1.2     Statement of the Problems      –        –        –        –        –        –

1.3     Objectives of the Study  –        –        –        –        –        –        –

1.4     Significance of the Study                  –        –        –        –        –        –

1.5     Scope of the Study        –        –        –        –        –        –        –        –

1.6     Research Questions       –        –        –        –        –        –        –

1.7     Definition of Terms       –        –        –        –        –        –        –

CHAPTER TWO: Literature Review

2.1     Specification and Standardization    –        –        –        –        –

2.2     Objectives of Specification and Standardization  –        –        –

2.3     Approaches to developing a Balanced Specification     –        –

2.4     Inspection   –        –        –        –        –        –        –        –        –

2.5     Types of Inspections     –        –        –        –        –        –        –

2.6     Defect Preventive Approach   –        –        –        –        –        –

2.7     Effects of Materials Inspection on the Quality of Products     –

 

 

CHAPTER THREE: Research Methodology

3.1     Area of the Study –        –        –        –        –        –        –        –

3.2     Research Design   –        –        –        –        –        –        –        –

3.3     Population of the Study –        –        –        –        –        –        –

3.4     Sample and Sampling Procedure      –        –        –        –        –

3.5     Instrument for Data Collection         –        –        –        –        –        –

3.6     Administration of the Instrument     –        –        –        –        –

3.7     Techniques for Analyzing Data         –        –        –        –        –        –

CHAPTER FOUR: Data Presentation and Analysis

4.1     Presentation of Results  –        –        –        –        –        –        –

CHAPTER FIVE: Summary, Discussions, Conclusion and Recommendations

5.1     Summary of Procedures –        –        –        –        –        –        –

5.2     Discussion of Findings  –        –        –        –        –        –        –

5.3     Implications of Findings          –        –        –        –        –        –        –

5.4     Conclusions         –        –        –        –        –        –        –        –        –

5.5     Recommendations         –        –        –        –        –        –        –        –

5.6     Suggestions for Further Study –        –        –        –        –        –

Bibliography        –        –        –        –        –        –        –        –

Appendix   –        –        –        –        –        –        –        –        –

 

CHAPTER I: Introduction

1.1     Background of the Study

Doug Wallace, a Materials Management subject expert with Life Cycle Engineering [L.C.E] Consultancy Company Charleston, South Carolina; in a paper presentation titled “Maintenance and Reliability Inventory Management” gave an apt and practical illustration that underscores the need for inspection. He said, have you heard of the guys that burned up a brand new piece of rotating equipment because it was installed with no oil in it? That little oversight cost  $80,000 for a replacement. When properly lubricated, it would have cost less than $100”. Again, he said, “How about the guys that cut a section out of their raw materials feeder line and then find out the replacement piece was just a little bit too short to fit into the gap? That little mistake cost thousands of dollars in unplanned repairs and potentially hundreds of thousands in lost production”.

This brings to mind the two renowned cases in Nigeria of Indomie Instant Noodles Poisoning Crisis of 2004 and Pfizer Poisoning Crisis, Kano 1996. What these organizations suffered in terms of cost, production revenue loss and image can only be imagined.

Again, operating in an unstable environment riffed with stiff competition; product quality management has become in more ways than one the life-blood of the organization. Be that as it may, and as strategic as product quality is to success of the organization, it will be near impossible if not impossible to achieve the goals of enhancing, maintain and sustaining product quality without the eagle eye of inspection.

Inspection itself is a word with many synonyms, so, whether a writer chooses the word examination, observation, investigation or assessment, it will still be inspection, and sometimes the word testing is adopted depending on what is being inspected.

The general idea and concept is to ascertain or determine quality or conformity of materials, products and components to pre-set standards and specification.

So, materials outsourced or insourced either as raw materials, components, spare parts or MROs as well as the organizations output are subjected to thorough examination to ensure that they conformed to specifications and standards before they are certify for production or consumption.

 

Keywords: ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA

 


DO YOU WANT TO ORDER FOR THE COMPLETE PROJECT MATERIAL? Then click here

GET COMPLETE PROJECT

Have you made payment for this project? If YES, contact our Customer Care.

For further enquiries, call our Hotlines ☎: 08139342394 or 08152487601


PROJECT TOPICS AND MATERIALS | HIRE A WRITER | HOW TO PAY FOR PROJECT

 

Keywords: ROLE OF INSPECTION IN PRODUCT QUALITY MANAGEMENT DRIVE IN NORTHERN NOODLES LTD, KADUNA

DISCLAIMER: hiWriters.com.ng focus on attracting students and researchers to materials that can be used as guide, framework, and reference for their project work. All contents/materials on this website are for research purposes only and for no reason should you copy verbatim. This platform is not encouraging any form of plagiarism, neither are we advocating the use of the project materials for cheating. We strictly recommend that research project topics and materials ordered for should serve as a guide or framework only. The contents therein should be used to generate fresh ideas for your own research. Finally, hiWriters.com.ng will not be liable for any material used inappropriately.